 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Data downloaded from http://www.angliac.com - the website of Anglia - tel: 01945 474747 MNR34 Resistors Chip resistor networks MNR34 (3216x4 size) !Features 1) Convex electrodes Easy to check the fillet after soldering is finished. 2) Compatible with a wide range of mounting equipment. Squared corners make it excellent for mounting using image recognition devices. 3) High-density mounting Can be mounted even more densely than four 3216 chips (MCR18). Also, the number of parts and cost of mounting have been reduced. 4) ROHM resistors have approved ISO-9001 certification. Design and specifications are subject to change without notice. Carefully check the specification sheet supplied with the product before using or ordering it. !Ratings Item Rated power Conditions Power must be derated according to the power derating curve in Figure 1 when ambient temperature exceeds 70C. 100 80 POWER LOAD (%) Specifications 0.125W (1 / 8W) at 70C 60 40 20 0 -55 0 70 100 125 AMBIENT TEMPERATURE (C) Fig.1 Rated voltage The voltage rating is calculated by the following equation. If the value obtained exceeds the limiting element voltage, the voltage rating is equal to the maximum operating voltage. E: Rated voltage (V) E= PxR P: Rated power (W) R: Nominal resistance () Nominal resistance Operating temperature See Table 1. -55C~+125C Limiting element voltage 200V For the very latest product data and news visit angliac.com Data downloaded from http://www.angliac.com - the website of Anglia - tel: 01945 474747 MNR34 Resistors Jumper type Resistance Rated current Max. 50m 2A J (5%) Table 1 Resistance tolerance Resistance range () Resistance temperature coefficient (ppm / C) Operating temperature -55C~+125C 10R1M (E24) 200 *Before using components in circuits where they will be exposed to transients such as pulse loads (short-duration, high-level loads), be certain to evaluate the component in the mounted state. In addition, the reliability and performance of this component cannot be guaranteed if it is used with a steady state voltage that is greater than its rated voltage. !Characteristics Item Resistance Variation of resistance with temperature Overload (2.0%+0.1) Guaranteed value Resistor type Jumper type J : 5% Max. 50m Test conditions (JIS C 5201-1) JIS C 5201-1 4.5 JIS C 5201-1 4.8 Measurement : -55 / +25 / +125C JIS C 5201-1 4.13 Rated voltage (current) x2.5, 2s. Limiting Element Voltagex2 : 400V JIS C 5201-1 4.17 Rosin*Ethanol (25%WT) Soldering condition : 2355C Duration of immersion : 2.00.5s. JIS C 5201-1 4.18 Soldering condition : 2605C Duration of immersion : 101s. JIS C 5201-1 4.19 Test temp. : -55C~+125C 5cyc JIS C 5201-1 4.24 40C, 93%RH Test time : 1,000h~1,048h JIS C 5201-1 4.25.1 Rated voltage (current), 70C 1.5h : ON - 0.5h : OFF Test time : 1,000h~1,048h JIS C 5201-1 4.25.3 125C Test time : 1,000h~1,048h JIS C 5201-1 4.29 235C, Immersion cleaning, 50.5min. Solvent : 2-propanol JIS C 5201-1 4.33 See Table.1 Max. 50m Solderability A new uniform coating of minimum of 95% of the surface being immersed and no soldering damage. (1.0%+0.05) Max. 50m No remarkable abnormality on the appearance. (1.0%+0.05) (3.0%+0.1) Max. 50m Max. 50m Resistance to soldering heat Rapid change of temperature Damp heat, steady state (3.0%+0.1) Endurance at 70C (3.0%+0.1) Endurance (1.0%+0.05) Resistance to solvent Max. 50m Max. 50m Max. 50m Bend strength of the end face plating Max. 50m (1.0%+0.05) Without mechanical damage such as breaks. For the very latest product data and news visit angliac.com Data downloaded from http://www.angliac.com - the website of Anglia - tel: 01945 474747 MNR34 Resistors !External dimensions (Units : mm) 5.20.4 Max.0.5 0.50.3 1.27 Cross section A-A' 6 1 No. B Material Thick dielectric glaze of ruthenium (only silver used for jumper) Thick film of silver for primary electrode Nickel-coated secondary electrode External electrode coated with Sn/Pb or Sn Alumina substrate Overcoating 5 3.10.2 1 2 3 A A103 B' A' Cross section B-B' 6 1 5 0.550.1 4 5 0.50.2 2 3 4 6 1.00.2 0.80.2 Pitch of the upper electrode. !Equivalent circuit R1 R2 R3 R4 R1=R2=R3=R4 !Packaging Reel Taping P0 P2 D 08 06 04 02 0 B0 A B D W F E K 02 04 06 08 A0 P1 C Label EIAJ ET-7200A compliant W 12.00.3 D0 (Units: mm) (Units: mm) F 5.50.05 P0 4.00.1 E 1.750.1 P1 4.00.1 A0 3.40.1 P2 2.00.05 B0 5.60.1 K 1.00.1 A 180 0 -3 B 60 +1 0 C 130.3 D 130.2 1.5 +0.1 0 For the very latest product data and news visit angliac.com Data downloaded from http://www.angliac.com - the website of Anglia - tel: 01945 474747 MNR34 Resistors !Product designation Part No. Packaging / Processing specifications Circuit configuration code AB MNR04/12/14/32/34 Resistance tolerance J 5% Nominal resistance 3-digit IEC coding system Code J5 Part No. MNR34 Packaging Taping Package style Embossed reel !Electrical characteristics TEMPERATURE COEFFICIENT (ppm / C) 6.0 4.0 JIS C 5201-1 4.5 SAMPLE SIZE : n=40pcs 20C 65%RH 400 300 200 R/R (%) JIS C 5201-1 4.8 SAMPLE SIZE : n=20pcs 25C / -55C 25C / 125C 6.0 4.0 2.0 0 -2.0 -4.0 -6.0 DC RESISTANCE (%) JIS C 5201-1 4.13 SAMPLE SIZE : n=20pcs RATED VOLTAGE x 2.5TIMES 2s LIMITING ELEMENT VOLTAGEx2 : 400V 2.0 0 -2.0 -4.0 -6.0 100 0 -100 -200 -300 -400 10 100 1k 10k 100k 1M 10 100 1k 10k 100k 1M 10 100 1k 10k 100k 1M RESISTANCE () RESISTANCE () RESISTANCE () Fig.2 Resistance Fig.3 Variation resistance with temperature Fig.4 Overload 3.0 2.0 1.0 R/R (%) 3.0 6.0 JIS C 5201-1 4.18 SAMPLE SIZE : n=20pcs SOLDERING CONDITION : 260C 10s R/R (%) 2.0 1.0 0 -1.0 -2.0 -3.0 JIS C 5201-1 4.19 SAMPLE SIZE : n=20pcs -55C / 125C 5cyc 4.0 2.0 JIS C 5201-1 4.24 SAMPLE SIZE : n=20pcs 40C 93%RH WITH NO LOAD 1,000h 0 -1.0 -2.0 -3.0 R/R (%) 10 100 1k 10k 100k 1M 0 -2.0 -4.0 -6.0 10 100 1k 10k 100k 1M RESISTANCE () 10 100 1k 10k 100k 1M RESISTANCE () RESISTANCE () Fig.5 Resistance to soldering heat Fig.6 Rapid change of temperature Fig.7 Damp heat, steady state For the very latest product data and news visit angliac.com Data downloaded from http://www.angliac.com - the website of Anglia - tel: 01945 474747 MNR34 Resistors 6.0 4.0 2.0 R/R (%) 6.0 2.0 JIS C 5201-1 4.25.3 SAMPLE SIZE : n=20pcs 125C WITH NO LOAD 1,000h RESISTANCE CHANGE (%) JIS C 5201-1 4.25.1 SAMPLE SIZE : n=20pcs 70C 1,000h OVERLOAD : THE RATED VOLTAGE R/R (%) 4.0 2.0 0 -2.0 -4.0 -6.0 1.5 1.0 0.5 0 -0.5 -1.0 -1.5 JIS C 5201-1 4.29 SAMPLE SIZE : n=20pcs IPA, 5min. 0 -2.0 -4.0 -6.0 10 100 1k 10k 100k 1M 10 100 1k 10k 100k 1M -2.0 10 100 1k 10k 100k 1M RESISTANCE () RESISTANCE () RESISTANCE () Fig.8 Endurance at 70C Fig.9 Endurance Fig.10 Resistance to solvents For the very latest product data and news visit angliac.com |
Price & Availability of MNR34
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |